Please Feel free to give your inquiry in the form below.We will reply you in 24 hours.
Technical Specifications for PHD3030S
Specification name | Items | Specification Value |
Plate dimension | Material thickness | 15mm-150mm |
Width x Length | 200×200-3000mm×3000mm | |
Diameter | Φ500mm-Φ3000mm | |
Spindle | Spindle tape type | BT50 |
Number of spindle | 1 | |
Drill hole diameter | With High speed carbide drill tool Φ80mm | |
With Twist drill Φ50mm | ||
Drilling roughness (high speed drilling) | ≤Ra12.5 | |
Carbide tool drilling depth | ≤3d | |
Rotate speed | 30-2400r/min | |
Travel length | 350mm | |
Spindle motor power | 22KW | |
Clamping system | Plate clamping | Hydraulic clamp |
Flange clamping | self-centering chucks | |
Hydraulic lamp number | 12 | |
Longitudinal movement of gantry (X aixs) | Travel length | 3000 mm |
Speed | 8m/min | |
Servo motor power | 2×3.0kW | |
Spindle movement at Y axis | Travel length | 3000mm |
Speed | 8m/min | |
Servo motor power | 2.0 kW | |
Spindle feeding movement at Z axis | Travel length | 350 mm |
Speed | 4m/min | |
Servo motor power | 2.0kW | |
Positional accuracy | X axis Y axis | 0.08/ whole travel |
Re-positional accuracy | X axis Y axis | 0.04/whole travel |
Air pressure | Compressed air pressure | 0.8MPa |
Chip remover and cooling | Chip remover type | Plate chain type |
Number of chip remover | 1 | |
Chip remover speed | 1m/min | |
Chip remover motor power | 0.75kW | |
Cooling type | internal cooling + external cooling | |
Cooling pressure | 1.0MPa | |
Hydraulic System | Clamp pressure | 6MPa(60kgf/cm2) |
Capacity of tank | 100L | |
Power | 2.2 kW | |
Electric System | Control system | Mitsubishi PLC |
CNC aixs | 4 | |
Motor total power | About 37kW | |
Machine outside size | L × W × H | About 6400mm×4300mm×2650mm |
Machine Weight | About 22000KGS |
List of the Key Outsourced Components
NO. | Name | Brand | Country |
1 | Linear guide rail | HTPM/HIWIN | Taiwan (China) |
2 | Spindle | Kenturn/Volis Spindle | Taiwan(China) |
3 | Hydraulic pump | Just Mark | Taiwan (China) |
4 | Electromagnetic hydraulic valve | Atos/YUKEN | Italy/Japan |
5 | Servo motor | Mitsubishi | Japan |
6 | Servo driver | Mitsubishi | Japan |
7 | PLC | Mitsubishi | Japan |
8 | Towline | IGUS | Germany |
Note: The above is our fixed supplier. It’s subject to be replaced by same quality components of other brand if the above supplier can’t supply the components in case of any special matter
This machine is mainly used for drilling plate workpieces in steel structures such as buildings, bridges, and iron towers. It can also be used for drilling tube plates, baffle plates, and circular flanges in the boiler and petrochemical industries. When Fried Dough Twists drills are used to drill holes, the maximum processing thickness is 100mm, and thinner plates can also be laminated to drill holes. When using a hard alloy drill for drilling, the drilling efficiency is high, and the maximum hole diameter can reach φ 80mm. This product is equipped with a hydraulic chuck on the workbench, which can hold a maximum workpiece diameter of 3000mm. This product can drill through holes, blind holes, step holes, and chamfer hole ends. High efficiency and precision.
The workpiece is clamped and fixed on the workbench. After inputting processing data, the entire processing process is automatically completed. This machine tool can be used for large-scale continuous production, as well as for multi variety and small batch production, and can store a large number of workpiece programs. The produced workpiece can be processed for the same type of workpiece next time it is called out.